The popular Mazda colour Machine Grey is applied using a cutting-edge robotic painting technology called Takuminuri, which makes the repair of this three-stage colour particularly demanding. Evgeny Khmelev, Head of Training for Europe, Middle East and Africa at Spies Hecker, gives practical tips for repairing it with the Spies Hecker Permahyd Hi-TEC 480 Base Coat system
Mazda has used 46G Machine Grey since 2016 for various models. It is painted using the cutting-edge robotic painting process called Takuminuri that Mazda also uses for Soul Red. Machine Grey consists of three layers: a reflective layer, a translucent layer and a clear layer.
"The embedded aluminium flakes create a metallic depth of colour, while pigments in the reflective and effect layers give an intense contrast between light and shadow. It almost looks like the vehicle has been milled out of a single block of steel," says Evgeny Khmelev, Spies Hecker Training & Technical Service Leader EMEA.
It is not easy to reproduce this sort of original paintwork effect during repairs. "Because of its complexity, Machine Grey can vary from model to model, even from vehicle to vehicle, and this is why we have a selection of mixing formulas for Permahyd Hi-TEC Base Coat 480 in our Phoenix colour software," adds Khmelev.
Here are Khmelev's tips on how to achieve a good tri-coat result even with a colour as complex as Machine Grey:
Tip 1: Make spray out cards
Because Machine Grey is so complex, it is recommended that after measuring the colour with ColorDialog Phoenix, a spray out card is made in order to find the best match of the silver effect with the original paint. It is vital to check the spray out card and original paint work under different light sources, especially natural daylight.
Tip 2: Apply a black basecoat
After the substrate has been prepared, the black basecoat is applied to full coverage and blended into the original paintwork. With small repair areas, a reduced gun pressure creates a particularly smooth transition to the rest of the paint job. It is important to let the basecoat dry and the panel cool completely.
Tip 3: Use a contrast sticker
Before applying a slightly transparent effect coat of concentrated black that contains a very fine aluminium, it is advisable to affix a black and grey contrast sticker in a place that will be painted over. The sticker helps to track how much coverage is being applied by this effect layer during application, as it is important not to apply to full hiding. Apply the blender to adjacent areas before switching to the effect colour. The effect coat is ideally applied as a thin, closed even coat.
Tip 4: Check the result in natural light
After the effect coating has dried, check the contrast sticker to see to what extent the base colour has been covered by the effect coat. If the effect coat has been applied with sufficient translucency, a clear coat can be applied. The result is finally carefully and critically checked under different light sources. The decisive factor is how the repair looks in daylight; this will show whether a good match with the original painting and smooth transitions between the repair and the original paintwork have been achieved.
Tip 5: Watch the video
Spies Hecker offers refinishers all-round support, simple system solutions and practical tips for everyday challenges including specific advice on the repair of Machine Grey. The tips are available on the brand’s YouTube channel - www.youtube.com/spieshecker - and via www.spieshecker.co.za/tips4you. Each five to ten minute video shows experienced paint professionals getting the best out of Spies Hecker products.
For more information about Spies Hecker, please visit www.spieshecker.co.za.
About Spies Hecker
Spies Hecker, a global refinish coating brand from Axalta, develops optimum and practical paint system solutions that make bodyshop work easier and more efficient. Originally from Cologne, Germany, and with over 135 years of success behind it, Spies Hecker’s high-quality product systems, customised service and tailored training demonstrate its partnership with the refinish industry. The paint brand is one of the world’s leading vehicle refinish brands, and is available in over 75 countries worldwide.
Spies Hecker – simply closer!