How to paint in a professional way.
New training videos entitled Tips4You focus on everyday repair methods.
Paint expert Tony Mitchell shows how it's done right.
Video 8: Fixing paint defects in dry Base Coat
From time to time unexpected end results pop-up when Permahyd Hi-TEC Basecoat is already dry.A blending mistake or dust / dirt contamination are the most common problems that painters are faced with.
Follow our tips for a quick fix.
Video 7: Blending-in with / without Blend-in Additive 1050/1051
We know that when working with Permahyd Hi-TEC, the Blend-in Additive is only sometimes used.
In this short video we will show you when you should use Blend-in Additives and when you can do your paint job without it. Look out also for our other videos for blending-in on larger areas and how to repair a 3-stage colours.
Video 6: Optimal Colour Matching - 100% Digital
There is an easier and more reliable way to find the correct colour formula than using fandeck color chips. Our colour specialist Inne Goossens guides Tony through the simple and effective digital colour retrieval process using ColorDialog Phoenix spectrophotometer and Phoenix software. The big hurdle all painters have, is to give up their established traditional work methods. Putting trust in a digital colour solution is a big challenge, but if you give it a chance you’ll find there is more to gain than to fear by using these modern tools.
Together with Permahyd® Hi-TEC Base Coat 480, you have not only the fastest way of application, but also the most efficient colour retrieval process.
Video 5: Turbo Fast Repair Process
Seeing is believing! And in this video, we demonstrate a typical repair from start to finish and how the new Speed-TEC product assortment brings the ultimate in paint repair efficiency and productivity whilst consuming the lowest possible amount of energy. And with the fact that quality and appearance are not compromised – thanks to the newest Axalta technology.
This product range offers a new dimension to today’s bodyshop. If you are really interested to see this product range in a practical way, then take 10 minutes and a cup of coffee and watch what we can offer you!
Video 4: 3-stage repair process
3 stage pearl colours are becoming more common, and they require certain attention in the refinish repair process if you want them 1st time right. Follow our tips on colour card preparation, correct undercoat color, application process and blending-in technique to help you achieve consistently good repairs using Permahyd Hi-TEC 480 basecoat.
Video 3: Blending-in process
Halo's and visible transitions are the most common problems when blending-in high metallic colours. With Permahyd Hi-TEC there is a fast, reliable and repeatable process, which will help you get consistently good results as we show you in this video.
Video 2: Control Mottling
Painting a bonnet with "Permahyd Hi-TEC Performance 480" is easy if you follow our technical datasheets, but if you do need to fix some clouding and mottling problems with tricky colours, then you need to know the best way.
Video 1: Application Guide for Hi-TEC Performance System
In this video we show the essential aspects of applying "Permahyd Hi-TEC Performance 480"on the full side of a car. The focus on several key points like how the 1.5 coat process should look like, the importance of spray gun distance, how to control overlaps and how the basecoat should look whilst it’s still wet.
Follow these simple steps and you will improve your results.